High As A Kite Vinyl Decal Die Cut Sticker

This is for one (1) vinyl decal. Sizes are in WIDTH.

Instructions will be included with your order.

If you are interested in other sizes or large quantities, feel free to contact me.

Vinyl decal application instructions:

Step 1 Clean area thoroughly with rubbing alcohol or soap and water. Don't use anything that leaves a residue or the decal wont stick properly.

Step 2 Prepare the decal for application by rubbing over the clear transfer tape with a squeegee, credit card or something similar.

Step 3 Peel the paper backing away from the decal very slowly. If the decal sticks, repeat.

Step 4 Apply decal to cleaned area, pressing firmly using squeegee or credit card.

Step 5 Slowly remove transfer paper. Be careful not to pull the decal away from the cleaned area. If decal starts to pull off, repeat step 4.

Step 6 If you can't use a squeegee or credit card to get air bubbles out, use a needle or sharp tip and poke the bubble gently then squeegee or use credit card.

If you have any trouble, please message me and we will get the issue figured out.